|

Why Radon Testing Matters and What Inspectors Recommend

Radon is one of the few indoor air quality concerns that can reach harmful concentrations in a home without any visible sign, smell, or warning. Understanding why radon testing home inspection considerations are handled separately from the standard inspection — and why testing matters regardless of geography or home type — helps buyers and homeowners make informed decisions about a risk that is both significant and highly addressable.


What Radon Is

Radon is a naturally occurring radioactive gas produced by the decay of uranium in soil and rock. It is colorless, odorless, and tasteless. Radon moves through soil and can enter buildings through cracks in foundations, construction joints, gaps around service pipes, and through sump systems or crawlspaces. Once inside a home, it can accumulate to elevated concentrations — particularly in lower levels with limited air exchange.

Long-term exposure to elevated radon levels is the second leading cause of lung cancer in the United States, according to the EPA. The risk is a function of concentration and duration: higher levels over longer periods create greater risk.


Why Testing Is the Only Way to Know

There is no way to determine radon levels in a home by looking at it. Radon concentrations are affected by soil composition, home construction type, foundation condition, ventilation patterns, and weather — none of which produce observable symptoms. Homes in the same neighborhood can have significantly different radon levels. A home without a basement can have elevated radon. A home in a lower-risk region is not immune.

The EPA recommends testing all homes below the third floor regardless of location. A home that has not been tested has an unknown radon level — not a safe one.


How Radon Is Tested

Radon testing is not part of a standard home inspection. It is a separate service, ordered and paid for independently, typically performed by a certified radon measurement professional or using a certified test device.

Short-term tests use charcoal canisters or similar devices placed in the lowest livable area of the home for 48 to 96 hours, then sent to a laboratory for analysis. Long-term tests use alpha track detectors left in place for 90 days to one year and provide a more representative average.

The EPA action level is 4 picocuries per liter (pCi/L). At or above this level, the EPA recommends mitigation. Levels between 2 and 4 pCi/L are considered elevated enough to consider mitigation. Average indoor radon levels in the US are approximately 1.3 pCi/L.


What Inspectors Recommend

A standard home inspector does not test for radon as part of a general inspection — radon testing requires specialized equipment and certified measurement protocols outside the scope of a visual inspection. What inspectors do is recommend that buyers commission a separate radon test, particularly in real estate transactions.

In many markets, radon testing during a real estate transaction is standard practice. The test is typically ordered at the same time as the home inspection and performed concurrently. Results are available before closing, giving buyers the opportunity to negotiate mitigation as part of the transaction if levels are elevated.


Mitigation

Radon mitigation is well-established and effective. The most common system is sub-slab depressurization — a pipe installed through the foundation slab with a fan that draws radon from beneath the home and exhausts it above the roofline before it can enter the living space. Properly installed mitigation systems typically reduce radon levels by 90% or more. The systems are not expensive relative to other home improvements and are not disruptive to daily living once installed.

A home with a radon mitigation system already installed is not necessarily a concern — it indicates a prior owner identified elevated levels and addressed them. The existing system should be inspected to confirm it is functional and properly installed.


Common Misunderstandings

“My neighbor’s house tested fine, so mine is probably fine too.”
Radon levels vary significantly between adjacent properties. Soil composition, foundation construction, and ventilation patterns all affect how radon enters and accumulates in a specific home. A neighbor’s test result has no predictive value for your home.

“Radon is only a concern in certain states.”
While the EPA has mapped higher-risk zones, elevated radon has been found in homes in all 50 states. Geography reduces or increases risk but does not eliminate it for any individual home.

“A radon mitigation system means the house has a serious problem.”
Mitigation systems are a straightforward, effective solution to a common condition. Their presence indicates the issue was identified and addressed. A properly functioning mitigation system in good condition is a feature, not a liability.


Educational Takeaway

Radon is invisible, odorless, and the only way to know whether a home has elevated levels is to test it. The test is simple, the results are clear, and if levels are elevated, mitigation is effective and accessible. For buyers, commissioning a radon test as part of the inspection process is one of the most straightforward health-protective steps available. For homeowners in untested homes, testing is a direct and inexpensive way to answer a question that cannot be answered any other way.


Educational Disclaimer

Inspector Howe provides general educational information to help you better understand your home. This content is not a professional inspection, certification, or compliance determination. Always consult a qualified professional for assessment of your specific property.

  • Why Carbon Monoxide Detectors Are Used in Homes
  • How Homes Are Supported Foundation Types and What Inspectors Evaluate
  • What Does a Home Inspection Generally Include
  • Why Home Inspections Are Visual and Non-Invasive
  • Crawlspaces Explained Ventilation Moisture and Structural Concerns
Inspector Howe Image and Name
ART-MNT-012

Similar Posts